FABRICATION OF OVERALL SAGE GREEN.
SWO PART II No. 60218.
SPECIFICATION NO: IAFS 09149 : 2016 WITH AMENDMENT NO. 5.
PARTICULARS PROVIDED WITH EXTRACT.
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
98210
Number
0
1980
20170181/EOT/F
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
Specification
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
3394464
Set
0
1911
201701920/pv/1556(A)/eot/f
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm
Specification
1) Raw Material : 100% Cotton
2) Count (Warp & Weft) : 30s
3) Ends per Inch : 76+/- 5
4) Picks per Inch : 76 +/- 5
5) Width : 150 cm (Min)
6) Weave : Plain
7) Coating : HDPE
8) Colour : White
9) GSM : 148 +5/-2.5%
10) Shrinkage % : As per Appendix A of IND/TC/2089(a)
11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a)
12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that :
a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between.
b. Roll weight shall not exceed 50 kgs.
c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet.
d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm.
e. Fabric selvedges shall be wound evenly at one edge.
13) Sampling plan : As per annexure.
